導軌絲杠在CNC工具機械中，主要功用在于增加定位精度及延長使用壽命。機械運轉時的背隙，通常會搭配有預壓力的導軌絲杠，但若導軌絲杠安裝不當時，就無法展現其高精度與較長的壽命。以下是避免導軌絲杠使用錯誤的建議：

The main function of guide screw in CNC tool machinery is to increase positioning accuracy and extend service life. To eliminate the back clearance during mechanical operation, it is usually paired with a pre pressed guide screw. However, if the guide screw is not installed properly, it cannot demonstrate its high accuracy and long service life. The following are suggestions to avoid incorrect use of guide screw:

1.不允許超載使用：導軌絲杠在使用過程中應該避免超載，因為超載容易導致導軌絲杠的負荷能力下降，影響使用壽命。

1. Overloading is not allowed: The guide screw should avoid overloading during use, as overloading can easily reduce the load capacity of the guide screw and affect its service life.

2.避免使用環境過于惡劣：如果導軌絲杠處于過于惡劣的環境中，如高溫、潮濕、腐蝕等，會影響導軌絲杠的使用效果，降低使用壽命。

2. Avoid using in harsh environments: If the guide screw is exposed to harsh environments such as high temperature, humidity, corrosion, etc., it can affect the effectiveness of the guide screw and reduce its service life.

3.不要在超出規定速度范圍的情況下使用：在選用導軌絲杠時，應根據規定的速度范圍來選擇適當?shù)男吞?，不可在超出?guī)定速度范圍的情況下使用。

3. Do not use it beyond the specified speed range: When selecting guide screw, the appropriate model should be selected based on the specified speed range, and cannot be used beyond the specified speed range.

4.避免使用過度：在使用導軌絲杠時應避免過度，導軌絲杠易產生磨損和疲勞，影響使用壽命。

4. Avoid excessive use: When using guide screw, excessive use should be avoided, as the guide screw is prone to wear and fatigue, which affects its service life.

5.定期潤滑：導軌絲杠需要定期潤滑，但是使用的潤滑油應符合產品規格，過量或不足都會導致故障的發生。

5. Regular lubrication: The guide screw needs regular lubrication, but the lubricating oil used should meet the product specifications. Excessive or insufficient lubrication can lead to faults.

6.注意清理：導軌絲杠在使用的過程中應定期清理，特別是清理導軌，防止灰塵等雜物進入導軌，影響導軌絲杠的使用壽命。

6. Attention to cleaning: The guide screw should be cleaned regularly during use, especially to prevent dust and other debris from entering the guide rail and affecting its service life.

7.嚴格控制安裝誤差：在安裝導軌絲杠時，應注意控制安裝誤差，特別是安裝定位部件時，一定要保證定位精度，避免因安裝失誤導致故障的發生。

7. Strictly control installation errors: When installing guide rail screws, attention should be paid to controlling installation errors, especially when installing positioning components, ensuring positioning accuracy to avoid faults caused by installation errors.

在安裝的過程中，導軌絲杠的摩擦系數很小，在搬運及安裝過程中，注意垂直放置時，避免螺帽或絲杠本身的自重而產生脫落造成損傷。如有上述情況，此時必須經制造商的重新檢修，以防止進一步損壞。您還有什么需求可以隨時來我們網站http://www.baoxianyingxiao.cn咨詢。

During the installation process, the friction coefficient of the guide rail lead screw is very small. During transportation and installation, pay attention to placing it vertically to avoid the nut or lead screw from falling off and causing damage due to its own weight. If the above situation occurs, it must be re inspected by the manufacturer to prevent further damage. If you have any further needs, please feel free to come to our website at any time http://www.baoxianyingxiao.cn consulting service